Grid Glossary

TRENDING TERM

Critical Issue Fast Path (CIFP)

An accelerated stakeholder process used in PJM Interconnection to resolve urgent, contentious, and time-sensitive issues that cannot be resolved through the normal stakeholder process. The process involves several stages of discussion and proposal development, culminating in a submission to the Federal Energy Regulatory Commission (FERC) for approval. The CIFP process has been used in recent years to discuss large load additions (2025) and resource adequacy (2023).

TRENDING TERM

Effective Load Carrying Capability (ELCC)

Measurement used to calculate how much an energy resource–such as a wind farm or solar array–contributes to the overall reliability of the grid. It assesses the resource’s ability to meet electricity demand, particularly during peak usage periods, and is especially useful for variable renewable energy sources whose output depends on factors like weather conditions. 

TRENDING TERM

Disturbance

Refers to any unwanted or unplanned electrical event that interferes with the normal operation of the electrical grid. These can manifest in power outages, surges, and other events, and can originate from various sources within the electrical grid, such as loss of a large generating unit or another grid asset, such as a transmission line or transformer.

Can’t find the term you’re looking for? Submit it here!

202(c) Order

An emergency order issued by the United States Department of Energy (DOE) under Section 202(c) of the Federal Power Act. It allows the Secretary of Energy to temporarily order connections of facilities and the generation, delivery, or transmission of electricity to best meet an emergency caused by war, a sudden increase in demand, or a shortage of energy or facilities. These temporary orders can also exempt power plants from federal, state, or local environmental rules and have historically been used to prevent outages during severe weather events or supply shortfalls.

Baseload

The minimum amount of electricity that a utility must provide to meet the consistent, ongoing needs of its customers. Historically, this steady demand was met by large power plants (like coal or nuclear) that ran continuously. Today, with more renewable energy, this minimum demand can be met by a flexible mix of various power sources, rather than relying solely on specific “baseload plants”.

  • Baseload capacity:  The generating equipment normally operated to serve loads on an around-the-clock basis.
  • Baseload plant:  A plant, usually housing high-efficiency steam-electric units, which produces electricity at an essentially constant rate and runs continuously. 
Battery Energy Storage System (BESS)

A technology that stores electrical energy in rechargeable batteries for later use. Batteries help stabilize the grid, manage energy demand, and increase the use of renewable energy.

Behind-the-meter

Any energy resource that provides energy directly to a home or business without passing through a utility company’s meter. Examples include rooftop solar and microgrids.

Peak demand

The brief periods when electricity consumption is at its highest, often driven by factors like extreme weather or heat events. This is the highest amount of electricity demand for which a grid operator needs to plan.

Peaker Plant

A power plant that is designed to quickly ramp up and provide electricity during periods of high energy demand, such as during hot summer afternoons or cold winter evenings, to meet the increased needs of households and businesses. These plants generally only run during these peak events to supplement regular power generation. 

Performance incentive mechanisms

A regulatory tool that ties a portion of utilities’ earnings to the utilities’ performance on desired regulatory outcomes, offering utilities opportunities to create the programs and services needed to advance emerging priorities.

Photovoltaic

The conversion of light into electricity at the junction of two substances exposed to light. A photovoltaic system employs solar modules, each comprising a number of solar cells, which generate electrical power.

PJM

Pennsylvania-New Jersey-Maryland Interconnection- services 13 states in Midatlantic and Midwest region

Power

The rate of transfer of energy. It’s essentially how quickly energy is being used or converted from one form to another in an electrical circuit. Power is measured in watts (W), which represents one joule (J) of energy per second.

Power Factor

A measure of how efficiently electrical power is being used. It shows how much of the total power flowing in a circuit is actually doing useful work (active power) versus being ”wasted” as reactive power. A power factor closer to 1 means higher efficiency and fewer losses.

PUC

Sometimes also called a Public Service Commission (PSC), is a state-level governmental agency that regulates utilities like electricity, gas, and water. PUCs ensure that these essential services are provided fairly, reliably, and at reasonable prices, often by overseeing monopolies and protecting consumers.

Reactive power

Power that does not perform useful work but is used to establish and maintain electromagnetic fields that are needed to generate, transmit, and convert electric power in the alternating current network. A shortage of reactive power can cause voltage to decline. (See also: voltage support)

Reliability

A characteristic of the whole electricity system to describe its ability to consistently deliver electricity to consumers without interruption, even through grid disturbances. Reliability comes down to having sufficient generating resources to meet demand and a functional operational grid system.

Reliability must-run (RMR) contract

An agreement initiated by an RTO or ISO with a power plant, keeping it in operation temporarily for reliability purposes.

Resilience

The ability of the grid to ride through extreme events, recover quickly, and support other critical systems (e.g., transportation, health care, public safety etc.).

Resource adequacy

An assessment of whether the current or projected resource mix is sufficient to meet capacity and energy needs for a particular grid. The resource mix includes all resources able to provide capacity and energy to the system. Adequacy assessments are used to identify potential shortfalls in the availability of resources across different time frames; from long-term planning (5 to 20+ years) to seasonal and day-ahead assessments.

RTO

 (see also: ISO) – A non-profit organization that manages the electricity transmission system in a specific region, ensuring reliable and efficient electricity delivery. RTOs operate the high-voltage electricity grid, facilitating the movement of power from generating plants to substations and ultimately to consumers. They also oversee competitive wholesale electricity markets.

Watts

Measure of the rate of energy transfer over a unit of time, with one watt equal to one joule (J) per second.

Wind power

A form of renewable energy that uses the kinetic energy of wind to generate electricity. It involves capturing the wind’s energy through turbines, which then convert this mechanical energy into electricity. Modern wind power generation primarily relies on wind turbines, often grouped into wind farms, connected to the electrical grid.

Glossary Form

Your Name(Required)

Contact Us

We’re glad you are here!
For any inquiries or to contact one of our experts please fill out our form.
This field is for validation purposes and should be left unchanged.
© 2025 All rights reserved The Reliable Grid Project.