Grid Glossary

TRENDING TERM

Critical Issue Fast Path (CIFP)

An accelerated stakeholder process used in PJM Interconnection to resolve urgent, contentious, and time-sensitive issues that cannot be resolved through the normal stakeholder process. The process involves several stages of discussion and proposal development, culminating in a submission to the Federal Energy Regulatory Commission (FERC) for approval. The CIFP process has been used in recent years to discuss large load additions (2025) and resource adequacy (2023).

TRENDING TERM

Effective Load Carrying Capability (ELCC)

Measurement used to calculate how much an energy resource–such as a wind farm or solar array–contributes to the overall reliability of the grid. It assesses the resource’s ability to meet electricity demand, particularly during peak usage periods, and is especially useful for variable renewable energy sources whose output depends on factors like weather conditions. 

TRENDING TERM

Disturbance

Refers to any unwanted or unplanned electrical event that interferes with the normal operation of the electrical grid. These can manifest in power outages, surges, and other events, and can originate from various sources within the electrical grid, such as loss of a large generating unit or another grid asset, such as a transmission line or transformer.

Can’t find the term you’re looking for? Submit it here!

202(c) Order

An emergency order issued by the United States Department of Energy (DOE) under Section 202(c) of the Federal Power Act. It allows the Secretary of Energy to temporarily order connections of facilities and the generation, delivery, or transmission of electricity to best meet an emergency caused by war, a sudden increase in demand, or a shortage of energy or facilities. These temporary orders can also exempt power plants from federal, state, or local environmental rules and have historically been used to prevent outages during severe weather events or supply shortfalls.

Baseload

The minimum amount of electricity that a utility must provide to meet the consistent, ongoing needs of its customers. Historically, this steady demand was met by large power plants (like coal or nuclear) that ran continuously. Today, with more renewable energy, this minimum demand can be met by a flexible mix of various power sources, rather than relying solely on specific “baseload plants”.

  • Baseload capacity:  The generating equipment normally operated to serve loads on an around-the-clock basis.
  • Baseload plant:  A plant, usually housing high-efficiency steam-electric units, which produces electricity at an essentially constant rate and runs continuously. 
Battery Energy Storage System (BESS)

A technology that stores electrical energy in rechargeable batteries for later use. Batteries help stabilize the grid, manage energy demand, and increase the use of renewable energy.

Behind-the-meter

Any energy resource that provides energy directly to a home or business without passing through a utility company’s meter. Examples include rooftop solar and microgrids.

Demand-response programs

These incentivize customers to reduce, increase, or shift their electricity consumption in response to price spikes or grid reliability signals. Most programs encourage utility customers primarily through price incentives to shift electricity consumption from hours of high demand (relative to energy supply) to hours when energy supply is plentiful (relative to demand).

Demand-side solutions

These encompass strategies and programs designed to influence electricity consumption patterns on the customer side of the meter. These initiatives aim to moderate electricity demand through methods such as financial incentives for energy conservation and energy efficiency measures, like improved insulation or the adoption of energy-efficient appliances. 

Dispatchable energy

Refers to electricity generation resources that power grid operators can control and adjust on demand to meet changing electricity needs. These include nuclear, hydropower, battery storage, and thermal power plants.

Distributed Energy Sources (DER)

Small-scale energy generation and storage technologies located near the point where the energy is used, rather than at a centralized power plant. These resources–such as solar microgrids, rooftop solar, and battery storage–can be used to enhance or replace traditional energy sources and can operate independently or be connected to the main grid. 

Disturbance

Refers to any unwanted or unplanned electrical event that interferes with the normal operation of the electrical grid. These can manifest in power outages, surges, and other events, and can originate from various sources within the electrical grid, such as loss of a large generating unit or another grid asset, such as a transmission line or transformer.

Disturbance ride-through

The ability of a piece of electrical equipment to stay connected to the grid through a short-term disturbance, thus helping keep the grid stable through the event. Inverter-based resources, such as photovoltaic solar arrays, wind turbines, and battery storage, can provide disturbance ride-through services, but require specific design of their control system to do so.

Docket

In energy regulation, it is a formal proceeding or official record initiated by a regulatory body (such as a Public Utilities Commission or the Federal Energy Regulatory Commission (FERC)) to address a specific issue or project. It serves as a repository for all submitted documents, evidence, and public comments.

Duck curve

A visual representation of how solar power generation impacts the daily electricity demand curve, particularly in regions with high solar adoption like California. It depicts a dip in net electricity demand during midday due to solar generation, followed by a steep increase in the evening as solar output decreases and demand peaks.

Hydrogen

Fuel cell that carries energy generated from another source. It can be used in fuel cells to generate electricity with water as the only byproduct, or it can be burned for heat. Hydrogen can be produced from a variety of sources–renewable energy such as solar or wind, or gas plants, nuclear, and other energy sources–which dictate whether it can be considered “clean” or not.

Watts

Measure of the rate of energy transfer over a unit of time, with one watt equal to one joule (J) per second.

Wind power

A form of renewable energy that uses the kinetic energy of wind to generate electricity. It involves capturing the wind’s energy through turbines, which then convert this mechanical energy into electricity. Modern wind power generation primarily relies on wind turbines, often grouped into wind farms, connected to the electrical grid.

Winter peaking

The increase in energy demand during the winter months, usually due to heating needs. This can lead to higher energy prices and bills for a number of reasons, including: 

  • Strained energy grid: The high demand can strain the energy grid, which can cause utilities to work harder to meet the need.
  • Seasonal rate adjustments: Many energy providers adjust rates based on seasonal demand.
  • Increased use of lighting: Shorter and darker winter days can lead to greater use of in-home lighting.

Glossary Form

Your Name(Required)

Contact Us

We’re glad you are here!
For any inquiries or to contact one of our experts please fill out our form.
This field is for validation purposes and should be left unchanged.
© 2025 All rights reserved The Reliable Grid Project.